3SE7150-2DD00 Siemens Grabwire Switch,25m,w/o Latching
Part Nnumber
3SE7150-2DD00
Description
Grabwire Switch,25m,w/o Latching
The product with part number 3SE7150-2DD00 (Grabwire Switch,25m,w/o Latching)
is from company Siemens and distributed with basic unit price 109,55 EUR. Minimal order quantity is 1 pc.
Depth42.5mm Housing MaterialGadolinium Aluminium Alloy IP RatingIP65 Length164.5mm Maximum AC Voltage400V Maximum Current6 A Maximum Operating Temperature+70°C Maximum Rope Span25m Minimum Operating Temperature-25°C Mounting OrientationStraight Normal State ConfigurationNO/NC Number of Cable Entries2 RangeSIRIUS Reset ButtonNo Series3SE7 Size of Cable EntriesM20 x 1.5 Width52mm Product Details 3SE7 Emergency Grab Wire Switch The 3SE7 series of grab wire switches (trip wire switches, cable operated switches) are used for monitoring or for EMERGENCY STOP devices on particularly dangerous system sections.As the effective range of a grab wire switch is only limited by the length of the grab wire, large systems can also be protected. Switches (requiring pulling at both ends) and conveyor belt unbalance trackers are used primarily for monitoring very long belt systems. DesignThe switches for wire lengths up to 50m are available with 1 NO + 1 NC or 2 NC contacts and for up to 75m with 1 NO + 3 NC contacts. The switches for wire lengths of 2 ´ 75m and the conveyor belt unbalance trackers are supplied with 2 NO + 2 NC contacts.The grab wire switch and the conveyor belt unbalance tracker are also available with a factory fitted LED (red, 24 V DC). This light has innovative on board chip technology that allows the operating state of the switch to be visible at a distance of at least 50m. FunctionThe NC contacts of the grab wire switch and the conveyor belt unbalance tracker are positive opening. The grab wire switches with one side operation are held in free position by the pre-tension on the turnbuckle. In the 3SE7 140 and 3SE7 150 grab wire switches, both switching contacts are available for wire-break/wire-pull signalling. The NO contact can be used, for example, for signalling purposes. On switches with interlocking, with a pre-tensioned wire, the locking must be deactivated beforehand in order to return the grab wire switch to its original position.Positive latching and positive NC contactsSwitches for wire lengths up to 75mMetal housingEnclosure is screw mountedIP65 ratingOperating temperature: -25 to +70°C Note Stock nos. 764-4341, 764-4301, 764-4304, 764-4357 are fitted with an indicator light. Approvals UL,CSA Standards The switches are equipped with positive latching and positive NC contacts and are therefore suitable for operation in EMERGENCY STOP devices in accordance with EN ISO 13850. They are usable up to Category 4 according to EN 954-1. Emergency Stop Rope Pull Switch
Following Parts
Random Products
(keyword 3SE7150-2DD00 Siemens Grabwire Switch,25m,w/o Latching)
